Reset Canon IP1980 and IP1880

If you don't have a reset software follow the steps below:

Switch on your printer Canon iP1900/iP1980
Press and hold Resume button for two (2) minutes then release Resume button.
The Printer will back to normal again.
If not use the following steps:

CANON PIXMA IP1900 is just a successor of ip1880 PARTS & MANUALS ARE THE SAME but a little bit faster than 1880

1.USE GENERAL TOOL http://www.ziddu.com/download/3063183/GeneralToolsforCanonPixmaip1880-xp.rar.html
2.CHANGE USB PORT change into CANON PORT
3.click lock release
4.click ip1800
5.click device id
6.clear waste ink counter by clicking MAIN & PLATEN
7.Check EEPROM Box
8.Click EEPROM Dump
9.Test pattern 1
10.Your Done…
but this is not the end of your problem
EVERYTIME YOU CLEAR WASTE INK COUNTER you have to open your printer
and wash the INK PAD and let it dry it will damage any part of your computer if you
will not do this.